2
1
TM 5-3810-305-23
0096
REMOVAL - Continued
WARNING
Weight of hub and studs is approximately 79 lb (36 kg). Use adequate lifting equipment to lift
and support hub and studs. DO NOT lift over personnel or let personnel walk underneath
suspended load. Failure to follow this warning may result in injury or death to personnel.
11.
Remove ring gear carrier assembly (Figure 5, Item 2) and hub (Figure 5, Item 1) from vehicle.
M0312105
Figure 5. Planetary Wheel End Removal.
END OF TASK
DISASSEMBLY
NOTE
If there are no visible signs of damage, bearing assemblies or oil seal and runner should not
be removed.
1.
Remove bearing cone (Figure 6, Item 1), if necessary, from ring gear carrier assembly (Figure 6, Item 2).
1
M0313105
2
Figure 6.
Planetary Wheel End Disassembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M00106)