TM 5-3810-305-23
0096
ASSEMBLY
WARNING
Wear protective equipment while heating and handling seal runner. Failure to follow this
warning may cause serious injury to personnel.
NOTE
Hub seal must be installed in the hub concentric and perpendicular to the axis.
1.
Heat hub seal runner (Figure 7, Item 1), if removed, to approximately 176F (80C). Install and secure with
threadlock compound.
2.
If removed, install brake assembly and 15 bolts, which attach the brakes to pivot and spindle assembly.
3.
If removed, install two bearing cups (Figure 7, Items 4 and 6).
4.
If removed, install bearing cone (Figure 7, Item 3) in hub (Figure 7, Item 5).
5.
Install hub seal (Figure 7, Item 3) into hub (Figure 8, Item 5) against shoulder.
6.
If removed, install 10 studs (Figure 7, Item 7) to hub (Figure 7, Item 5).
1
2
3
5
4
6
7
M0314105
Figure 7.
Planetary Wheel End Maintenance.
03/15/2011Rel(1.8)root(maintwp)wpno(M00106)
