TM 5-3810-305-23
0096
INSTALLATION - Continued
12.
Install drain plug (Figure 14, Item 4) on wheel hub (Figure 14, Item 1).
WARNING
Weight of brake drum is approximately 81 lb (37 kg). Use adequate lifting equipment to lift
and support brake drum. DO NOT lift over personnel or let personnel walk underneath
suspended load. Failure to follow this warning may result in serious injury or death to
personnel.
13.
Install brake drum (Figure 13, Item 2) and three assembly screws (Figure 13, Item 3) on wheel hub
(Figure 13, Item 1). Tighten screws to 14 to 18 ft-lb (19 to 24 Nm).
1
2
3
4
M0308105
Figure 13.
Planetary Wheel End Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install tire and wheel assemblies (WP 0107).
2.
Fill with oil (TM 5-3810-305-10).
3.
Connect battery cables (WP 0076).
4.
Place boom in resting position (TM 5-3810-305-10).
5.
Check for proper operation.
END OF TASK
END OF WORK PACKAGE
