TM 5-3810-305-23
0129
REMOVAL - Continued
Swing And Outrigger Cable
NOTE
The valve end of boom hoist, extend and winch cables are different from outrigger and swing
cable. The end of each cable group must be removed using the correct procedure.
1.
Remove cotter pin (Figure 4, Item 2) and pin (Figure 4, Item 10) from clevis (Figure 4, Item 9).
Discard cotter pin.
2.
Remove two jam nuts (Figure 4, Item 1) and clevis (Figure 4, Item 9).
3.
Loosen two locking nuts (Figure 4, Item 3) and pull cable from bracket.
4.
Remove two locking nuts (Figure 4, Item 5) and washers (Figure 4, Items 6 and 8) from clamps
(Figure 4, Item 7).
5.
Carefully pull cable (Figure 4, Item 4) out of vehicle.
1
2
1
10
9
3
4
5
6
7
8
M0561105
Figure 4.
Swing and Outrigger Cable Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00145)
