TM 5-3810-305-23
FIELD MAINTENANCE
UPPERSTRUCTURE MAINTENANCE
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Strap, Tie Down Electrical (WP 0172, Table 1, Item
Tool Kit, General Mechanic's (WP 0171, Table 1,
Item 17)
164) Qty: 2
Multiplier, Torque Wrench (WP 0171, Table 1, Item
Tag, Marker (WP 0170, Table 1, Item 68) Qty: 1
30)
Washer, Lock (WP 0172, Table 1, Item 48)
Suitable Lifting Device, 10,000-lb (4,536 kgs)
Qty: 1
Minimum Capacity
Washer, Lock (WP 0172, Table 1, Item 128)
Wrench, Torque, 3/4 Inch Drive Ratcheting, 600 ft-
Qty: 3
lb (WP 0171, Table 1, Item 34)
Personnel Required
Materials/Parts
(Two)
Nut, Self-Locking (WP 0172, Table 1, Item 136)
Qty: 2
References
Nut, Self-Locking (WP 0172, Table 1, Item 139)
Qty: 8
O-Ring (WP 0172, Table 1, Item 43) Qty: 4
O-Ring (WP 0172, Table 1, Item 120) Qty: 5
Equipment Condition
O-Ring (WP 0172, Table 1, Item 146) Qty: 5
Battery cables disconnected (WP 0076)
Rag, Wiping (WP 0170, Table 1, Item 52) Qty: 1
Boom removed (WP 0156)
REMOVAL
Upperstructure
WARNING
Weight of hub and studs is approximately 79 lb (36 kg). Use adequate lifting equipment to lift
and support hub and studs. DO NOT lift over personnel or let personnel walk underneath
suspended load. Failure to follow this warning may result in injury or death to personnel.
1.
Use a lifting device to raise boom hoist cylinder and hold it in vertical position.
0158-1
03/15/2011Rel(1.8)root(maintwp)wpno(M00175)