TM 5-3810-305-23
0158
REMOVAL - Continued
Swing Bearing Assembly - Continued
WARNING
Weight of swing bearing is approximately 187 lb (85 kg). Use adequate lifting equipment to
lift and support swing bearing. DO NOT lift over personnel or let personnel walk underneath
suspended load. Failure to follow this warning may cause injury or death to personnel.
4.
Install two lifting eye bolts in swing bearing (Figure 4, Item 2) 180 degrees apart. Attach lifting device and lift
swing bearing over rotary manifold and electrical collector ring.
1
2
4
3
M0596105
Figure 4. Swing Bearing Assembly Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00175)