TM 5-3810-306-20
LEFT CONSOLE HARNESS INSTALLATION
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
None
EQUIPMENT CONDITIONS
Disconnect ground cable at shunt. (Refer to page 8-109.)
Left front control panel removed. (Refer to page 8-11.)
Front side access panel removed. (Refer to page 8-21.)
REMOVAL:
1.
REMOVE LEFT CONSOLE HARNESS (1).
a.
Tag and disconnect ground wire 70 (2) from
each gauge.
b.
Tag and disconnect wire 40 (3) from each
gauge.
c.
Tag and disconnect two electrical connectors
from tachometer (4).
d.
Tag and disconnect three pin/receptacles (5)
carrying wires to gauge lights.
e.
Tag and disconnect two electrical connectors to
cold start switch (6).
f.
Unscrew
locknut
and
remove
electrical
connector to blackout light switch (7).
g.
Tag and disconnect wires 32, 25, 3 and 4 to
gauges (8).
2.
REMOVE LEFT CONSOLE HARNESS (1).
INSTALLATION
1.
INSTALL LEFT CONSOLE HARNESS (1).
a.
Connect tagged wires 32, 25, 3 and 4 to gauges
(8).
b.
Connect electrical connector to blackout light
switch (7) and secure with locknut.
c.
Connect tagged wires to cold start switch (6).
d.
Connect three tagged electrical connectors (5) to
gauge lights.
e.
Connect tagged "T-Tags" on wire 70 (2) to each
gauge.
f.
Connect tagged "T-Tags" on wire 40 (3) to each
gauge.
g.
Connect two tagged electrical connectors on
wires 54 and 10 to tachometer (4).
2.
INSTALL LEFT FRONT CONTROL PANEL.REFER
TO PAGE 8-11.)
3.
INSTALL FRONT SIDE ACCESS PANEL. (REFER
TO PAGE 8-21.)
4.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
5.
START ENGINE. CHECK LEFT CONSOLE
COMPONENTS FOR PROPER
OPERATION.
(REFER TO TM 5-3810-306-10.)
END OF TASK
8-12
