TM 5-3810-306-20
g.
Using the auxiliary hoist cable as a point of
reference, check telescope and base section
alignment. If aligned, auxiliary hoist cable will
cover the centerline marks made in step b.
CAUTION
When backing off and tightening
opposite side thrust pads be sure to
turn screws an equal number of turns
in
order
to
maintain
previously
established optimum width between
side thrust pads.
h.
If necessary, adjust telescope and base section
alignment by adjusting side thrust pads. If, for
example, telescope section mark is to left of
base section mark, back off on right side thrust
pad adjusting screws and tighten left side thrust
pad adjusting screws.
END OF TASK
17-11
