Figure 5-4. Storage Location D

Figure 5-11A. Installing the Truss Rods - TM-5-3810-305-10_170

TM-5-3810-305-10 Crane Wheel Mounted Hydraulic Light 7 1/2 Ton (Rough Terrain Crane) Model LRT 110 Manual
Page Navigation
161

TM5-3810-305-10 a. Be aware of limited work area while lifting, reaching and assembling mast and lift arm. Deck and fender surface is small b. and can become slippery in inclement weather. Failure to follow this procedure could cause DEATH or serious injury. 4. Install mast (3) on carrier as follows: Weight of the mast is approxi- mately 98 lb (44 kg). Use two people to properly support and lift mast. Failure to follow this procedure could cause DEATH or serious injury. Remove two pins (2) and mast (3) from storage location D (Figure 5-4) on left side of upperstructure. Store two pins (2) in tool box for future use. With the aid of another person, raise mast (3) and lower it over square pivot bearing (9, Figure 5-10), located on right side of frame, behind operator’s cab. Position stop on mast (3) towards center line of vehicle between stops. Mast base ears should be over fender. Align ears on top of mast with support ears on frame. Figure 5-4. Storage Location D Figure 5-11. Storage Locations A and B 5-30 Figure 5-10. Assembling the Mast

Privacy Statement
Press Release
Contact