TM 5-3810-306-20RIGHT CONSOLE HARNESS INSTALLATIONTOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)SUPPLIES:NoneEQUIPMENT CONDITIONS: Disconnect ground cable at shunt. (Refer to page 8-109.)Front right control panel removed. (Refer to page 8-11.)Front side access panel removed. (Refer to page 8-21.)REMOVAL:1.REMOVE RIGHT CONSOLE HARNESS (2).a.Tag and disconnect two electrical connectors towarning buzzer (3).b.Tag and disconnect three electrical connectorsto. skylight wiper switch (4).c.Tag and disconnect four electrical connectors tofront. wiper switch (5).d.Tag and disconnect two electrical connectors toengine start button (6).e.Tag and disconnect two electrical connectors toignition switch (7).f.Disconnect terminal plug to AV warning harness(1).2.REMOVE RIGHT CONSOLE HARNESS (2).INSTALLATION:1.INSTALL RIGHT CONSOLE HARNESS (2).a.Connect plug to AV warning harness (1).b.Connect tagged electrical connectors to ignitionswitch (7).c.Connect tagged electrical connectors to enginestart button (6).d.Connect tagged electrical connector to frontwiper switch (5).e.Connect tagged electrical connectors to skylightwiper switch (4).f.Connect tagged electrical connectors to warningbuzzer.2.INSTALL RIGHT FRONT CONTROL PANEL.(REFER TO PAGE 8-11.)3.INSTALL FRONT SIDE ACCESS PANEL. (REFERTO PAGE 8-21.)4.CONNECT GROUND CABLE AT SHUNT.(REFER TO PAGE 8-109.)5.START ENGINE. CHECK RIGHT CONSOLECOMPONENTS FOR PROPER OPERATION.(REFER TO TM 5-3810-306-10.)END OF TASK8-14
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
