TM 5-3810-306-20
AV HARNESS INSTALLATION
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES
None
EQUIPMENT CONDITIONS: Disconnect ground cable at shunt. (Refer to page 8-109.)
Right front control panel removed. (Refer to page 8-11.)
REMOVAL:
1.
REMOVE AV HARNESS (1).
a. Tag and disconnect AV harness (1) at LED alert
module.
b.
Tag and disconnect AV harness at right console
harness.
c.
Remove AV harness (1).
2.
INSPECT AV HARNESS (1) FOR DAMAGED WIRE
AND CONNECTORS. REPAIR OR REPLACE AS
NEEDED
INSTALLATION:
1.
INSTALL AV HARNESS (1).
a.
Connect AV harness (1) at right console
harness.
b.
Connect AV harness (1) to LED alert module.
2.
INSTALL RIGHT FRONT CONSOLE. (REFER TO
PAGE 8-11.)
3.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
4.
START ENGINE AND CHECK OPERATION OF
LED ALERT MODULE. (REFER TO TM 5-3810-
306-10.)
END OF TASK
8-16
